HOZO M-Cube 02 Anti-Gravity Laser Level
design
The M-Cube 02 Anti-Gravity Laser Level Pro arrives in two parts: the 02 module itself (the “anti-gravity” bit with the suction and lasers) and the M-Cube Main Unit (a compact digital measuring device that fits into the top). The Main Unit is a neat little thing actually, it’s solidly built and pocket-friendly, with a touchscreen and a satisfying click when it magnetically snaps into place on the 02. On its own, it functions as a laser distance measurer, angle finder, and digital level, which makes it a handy tool in its own right that I found myself reaching for more often than a classic tape measure.
The 02 module, by contrast, is chunky, there’s no being polite about it. This is where the vacuum pump, battery, and levelling mechanisms live, and it shows. At 105 × 105 × 55mm and 470g, it’s not something you’ll miss in your toolbox. Build quality across both units feels reassuringly solid, and the combined unit has a modern, design-forward aesthetic that wouldn’t look out of place on an architect’s desk.
The base of the M-Cube 02 features a ring of memory foam surrounding the vacuum inlet, which creates the seal against your chosen surface. There’s not a huge amount of give in the foam but after a couple of weeks of use I’ve noticed the foam has already retained some impressions from being pressed against various surfaces. Whether this will worsen over time and eventually compromise the seal is something only longer-term use will reveal, but it’s worth keeping an eye on.
Once mounted, the unit rotates smoothly through 360 degrees to adjust your laser angle, with just enough resistance to make fine adjustments easy without the whole thing spinning freely. What’s missing, though, is a tripod thread. I know, I know, the whole point of this is to do away with old-school tech like that, but I don’t always want to measure or align something along a wall. If you wanted to use this on a traditional tripod for floor-based work or outdoor use, you’re out of luck.
The Premium Combo includes the TargetMate (a target plate for precise crosshair measurements), GripMate (a pin-based mount for surfaces where suction won’t work), and CenterMate (for pinpointing positions).
performance
There are two halves to the HOZO M-Cube 02, each with their own uses and quirks. The Main Unit, and the anti-gravity 02 module. You can use each without the other, but like Banjo and Kazooie, they’re probably most powerful and useful as a team.
As a laser distance measurer, the Main Unit proved a handy addition to my toolbox. It’ll handle distances up to 50 metres with claimed accuracy of ±2mm, which puts it on par with dedicated laser measures in the same price bracket. The 1.89-inch touchscreen is reasonably responsive and perfectly legible, displaying measurements clearly without squinting, and switching between metric and imperial is painless. There are some user experience quirks that get frustrating however. There are inconsistencies in what gestures do and don’t work. For example in some tools swiping up from the bottom of the screen returns you home, in others it doesn’t, with no real reason why.
The digital angle finder and level functions work as you’d expect, and there’s something satisfying about having distance, angle, and level all in one pocket-sized unit rather than fishing around for separate tools. There’s other, more advanced feeling, functionality here too: midpoint finding, relative positioning, distance calculations, and more. But in my testing as a pretty basic DIYer, the learning curve is steeper than it should be, with little in the way of guidance on when or how to use each mode. This is the kind of thing that would improve with practice, I’m sure, but it does create a barrier to getting the most out of the product.
Battery life is generous on the Main Unit. HOZO claims 12 hours of continuous use, which equates to 14 days’ worth of regular use, and in practice I never came close to draining it during a session or even really noticing the battery icon change. I did encounter an issue where the unit would randomly power off mid-task, requiring a full restart. It didn’t happen constantly, but it happened enough to be annoying, particularly when you’ve just got everything aligned and positioned.
The real party trick is when you attach that Main Unit to the anti-gravity 02 base. Clip it in, press and hold the central dial for a couple of seconds and the HOZO M-Cube 02 whirs into life, sucking itself onto whatever surface you’ve placed it against. It’s surprisingly loud and vibrates noticeably while the pump builds or maintains pressure, it won’t deafen you but it’s enough to get in the way of a conversation. A gauge on the front climbs from 0 to 100 as suction increases, and once it hits full pressure, the pump quietens down (though it kicks back in every few seconds to maintain the seal).
It does a great job of clinging on to solid surfaces though, it held firm on painted plaster, including upside down from the ceiling, glass, and my kitchen cabinets. It’ll understandably start to struggle as soon as you introduce grout lines or pronounced texture to surfaces however. In my testing it was able to overcome some gentle woodgrain but wouldn’t seal on cork, tiles with a grout line, or the fabric of my rubber-backed desk mat. I didn’t really expect any of these to work, and I don’t know many people who’ll try to stick onto a fully-cork wall either, but on far more likely surfaces you’ll use day to day the hold was excellent.
The laser itself is bright and clear, easily visible in typical indoor lighting conditions without needing enhancement glasses. I tested the green laser variant; a slight premium for those who need better visibility in brighter conditions, though there’s a red variant too that’s a little cheaper. HOZO rates the laser’s measuring accuracy at ±2mm and angle accuracy at ±0.1 degrees. I don’t have the means to verify these precisely, but nothing I encountered suggested any issues with accuracy in practice. The picture frames I mounted all looked straight and level enough to my eye.
Where the M-Cube 02 Anti-Gravity Laser Level Pro starts to stumble is if you try and get a little too clever and use the accompanying app. The MEAZOR app got off to a good start. It connected immediately via Bluetooth and remained reliable enough throughout testing, which is more than can be said for plenty of smart tools I’ve used. But “connected and reliable” is unfortunately where my compliments end in its current state. The app’s user interface is clunky and outdated, feeling distinctly beta in its appearance. Finding the remote control feature, arguably one of the most useful reasons to use the app, took me a good 10 minutes and a couple of YouTube videos. Once you know where everything is, it works well enough, but the onboarding experience is poor.
Now, all of my testing has been as someone who’s self proclaimed as a pretty lower-mid tier DIYer. So I showed the M-Cube 02 to a couple of professional handymen who were doing some work at my house. Not only were they impressed by the concept and execution, but the anti-gravity 02 module is something they’d never seen before. That’s a nice seal of approval from people who use levelling tools daily and have presumably seen plenty of gimmicks come and go.
summed up
The HOZO M-Cube 02 Anti-Gravity Laser Level Pro delivers on its core promise: stick it to a wall or ceiling, free up your hands, get on with your work. The vacuum suction feels like actual innovation rather than just gimmick, holding firm on surfaces that would defeat magnetic mounts and eliminating the tripod faff that makes traditional laser levels frustrating in tight spaces. Build quality is strong, the laser is clear, and the modular approach means you’re buying into an ecosystem that can, in theory, grow with your needs.
I have few genuine quibbles with the hardware, though the software lets it down, both on-device and off. An app that requires YouTube tutorials to discover a fundamental feature isn’t really acceptable at this price point, and the random shutoffs and changes in UX I experienced on the Main Unit itself add frustration to what should be a seamless workflow. The memory foam showing early signs of retaining impressions from light use is also a flag. If that seal degrades, the entire premise of the product quite literally falls down, and only time will tell whether that becomes an issue.
At £200+, you’re paying a premium over traditional laser levels with the HOZO M-Cube 02 Anti-Gravity Laser Level Pro, but you’re getting something no traditional laser level can do. For DIYers who regularly tackle solo projects and value the convenience of hands-free operation, it’s a compelling proposition despite its rough edges. Just be prepared to invest some time learning the system before it becomes the intuitive helper it should be out of the box.
